Forward Controls Design EMR-HC Magazine Catch Button
The Enhanced Magazine Release-Continuous Serrations features a slightly curved button surface to fit the natural curvature of your finger.
The form fitting curve, along with horizontal serrations, create a self centering surface that inhibits the finger’s vertical movements. The EMR-C has an uninterrupted surface and serrations, its taller profile makes it easier to press and is only 0.04 taller than the factory magazine release button. When installed, the EMR-C has a 0.08 protrusion above the mag release button fence on most forged receivers.
Due to the EMR-C’s installed height which protrudes 0.08″ over the mag release fence when installed (only 0.06″ or 0.07″ of the magazine release button travel is needed to drop a magazine), EMR-C is recommended for 7.62mm ARs only, though it does work on 5.56mm ARs and M16s. For defense and duty ARs and M16s, please use our EMR that has only a 0.01″ protrusion over most forged receiver magazine release fence.
For .308 ARs, the EMR-C’s taller profile will allow you to use AR15/M16 spec mag catch and ambidextrous mag catch/release. An EMR-C installed on a .308 AR will not protrude over the mag release fence.
Please visit the EMR vs EMR-C page for an in depth review of the differences between the EMR and EMR-C.
Made from 4140 bar stock and QPQ coated.
dsheets468 (verified owner) –
These are very high quality and just as functional as they are cosmetic. Adds finger traction and the round shape to the button face fits your finger very well. I went the dimpled route and these are a must have for me now!
Alex Utroska (verified owner) –
Good height, positive tactile feel under the finger, and an excellent compliment to any rifle. You can’t go wrong, and if you pair it with the ambi-mag release, it completes the OCD requirements checklist.
Just get it.. you’ll love it.